Multi-channel Charger Guidelines
Disclaimer Thank you for purchasing the EVO LiteTM battery multi-channel charger (referred to as "multi-charger"). Please read this statement carefully before using this product. Once this product is used, it is deemed to be an approval and acceptance of the entire content of this document. Please use this product strictly in accordance with this manual, and be sure to pay attention to warnings.
Product Introduction Multi-charger can expand the battery interface to be multiple. It can be used with the EVO Lite standard adapter, which can connect up to 3 EVO Lite batteries for charging. 1 2 Battery port Power port 1 2 Product Use 1. Connect the power supply Connect the EVO Lite standard adapter to the power socket (100-240V), and then plug the charging connector into the power port of the multi-charger. 2. Charge Insert the aircraft battery into the battery port to start charging.
Product Features • Charge management Sequence charging: Priority is given to charging the battery with the highest amount of power remaining, and when it reaches full charge, it will continue to charge the next battery with the highest power. In sequence charging mode, only one battery will be charged at a time. Please unplug once the battery is fully charged. Note: Inserting the battery may interrupt the battery being charged. Specification Operating Voltage ��.