EVO Lite Series User Manual

Chapter 5 Flight
EVO Lite series adopts the unique portable design and has been assembled in factory. In order
to ensure safe operation of UAV, please read the following instructions and warnings before
first flight.
5.1 Safe operation guide
5.1.1 Flight environment
 Please abide by the local laws and regulations on UAV flight. Fly only in the designated
aircraft movement area, and use Autel Sky App to set the satisfactory distance and height
limits.

Never fly in severe weather such as heavy fog, rain, hail, snow, high wind (force 6 and
above) and so on.
 Please fly in an open area away from densely-populated area, building and
electromagnetic interference source. The building containing more reinforcement bars
will affect the operation of compass and block the GPS signal, causing the poor
positioning of aircraft and even positioning failure. It is recommended to keep the
aircraft from the building by at least 5m.
 Please fly in the area where the altitude is 5000m below.
 In the case of flying indoors, some functions may be limited due to insufficient light, lack
of GPS signal or narrow space.
 Please control the aircraft within the range of visibility, and keep it away from obstacle,
crowd, water surface (by 3m above), etc.
5.1.2 Pre-flight
Before the UAV flies, it is always necessary to pay attention to the following matters:
 Ensure that the aircraft, remote controller and mobile device are fully charged.
 Ensure that the protective cover for gimbal have been removed.

Ensure that the aircraft camera lens and sensor keep clean.
 Ensure that the propeller has been installed correctly without damage.
 Ensure that each component of the aircraft has been assembled.