Product Manual

NOTE

When not connected to the aircraft, the remote control beeps after 15

minutes of inactivity, and turns off automatically after 18 minutes.

3.2.3 Remote Control Calibration

If the Command Sticks are abnormal (for example, if the remote control is dropped

on the ground, or the aircraft’s flight direction does not match control inputs), it is

recommended to calibrate the remote control. You can calibrate the remote control

by using the Autel Explorer™ app (for details, see the App Manual) or according

to the following steps.

1. Turn off the remote control. Press and

hold the Power Button ( ) and

Take-off/Landing Button ( )

simultaneously until the screen appears

as shown on the right. The four crossed

bars represent the left and right

Command Sticks. The horizontal bar

at the top is the Gimbal Pitch Dial.

2. Release both Command Sticks and the

Gimbal Pitch Dial naturally to the

central position. The three middle

rounds on the remote control calibration

screen will be highlighted successively.

3. Push and hold the Command Sticks in

each of the eight possible directions until

you hear a beep each time. Then, turn

the Gimbal Pitch Dial clockwise until

you hear a beep, and then

counterclockwise until you hear a beep.

4. Calibration is completed when all the

bars on the screen are highlighted.

3.2.4 Pairing the Aircraft & Remote Control