Product Manual

1. Find the desired position for landing the aircraft.

2. When the aircraft reaches the target position, release the Command Sticks to

let it hover.

3. Push the Left Command Stick downwards slowly to land the aircraft.

 Shutting down the motors

Choose one of the following methods to shut down the motors after the aircraft

reaches the ground:

Push the Left Command Stick to the

bottom and hold for 2s

Hold both Command Sticks toe-in

for 2s

 Automatic Landing

Press the Take-off/Landing Button ( ) on the remote control to land the aircraft

automatically from its current hover position.

1. Navigate the aircraft to the target landing position.

2. Release the Command Sticks and let the aircraft hover.

3. Press and hold the Take-off/Landing Button ( ) for 2 seconds until you

hear a beep from the remote control.

4. The aircraft will descend, land and shut off its motors automatically. During

descent, you can adjust the aircraft position using the Right Command Stick.

TIPS

During the automatic descent process, you can regain control by pressing

the Pause Button ( ) on the remote control.

NOTES

• Automatic landing is also available in ATTI mode ( 12). However, the

aircraft may drift in this mode, so you should monitor its altitude.