User manual
Table Of Contents
- User Manual
- EVO Lite Series
- Terms for Usage
- Trademark Information
- Copyright
- Disclaimer
- Data Storage and Use
- Table of contents
- Chapter 1 Read Instructions
- Chapter 2 Aircraft
- ① Propeller
- ④ Gimbal camera
- ② Undercarriage
- ⑤ Front LED indicator
- ③ Forward visual system
- ⑥ Motor
- ⑦ Power button
- ⑨ Rear LED indicator
- ⑧ Rear vision system
- ⑩ Air outlet
- ⑪ SD card slot
- ⑫ Aircraft battery
- ⑬ USB-C port
- ⑭ Ultrasonic sensor
- ⑯ Downward vision system
- ⑮ Downward LED
- The aircraft has one LED indicator at the end of e
- Designated symbol of color:
- R - Red
- Y - Yellow
- G - Green
- B - Blue
- Front LED Indicator
- Back LED Indicator
- Meaning
- B - Normally on
- G - Slow flash(2 secs/1 time)
- Aircraft in GPS mode
- B - Normally on
- Y - Slow flash(1 sec/1 time)
- Aircraft in ATTI mode
- B - Normally on
- Y - Slow flash(1 sec/1 time)
- Low battery warning
- B - Normally on
- R - Slow flash(1 sec/1 time)
- Serious low battery warning
- B - Normally on
- Y - Normally on
- Aircraft under calibration
- B - Normally on
- G - Normally on
- Calibration successful
- B - Normally on
- Y - Normally on
- Calibration failed
- B - Rapid flash
- G - Rapid flash
- Aircraft under pairing
- B - Rapid flash
- G - Normally on 5S
- Pairing successful
- B - Rapid flash
- R - Normally on 5S
- Pairing failed
- B - Rapid flash
- G - Rapid flash
- Aircraft under upgrading
- B - Normally on
- G - Normally on
- Upgrading successful
- B - Normally on
- Y - Slow flash(1 sec/1 time)
- Upgrading failed
- The battery for EVO Lite is 6175mAh and has the ra
- The battery indicator is divided into LED 1, LED
- Chapter 3 Remote controller
- Chapter 4 Autel Sky App
- When shooting night scene videos, users can choose
- Standard: The shooting effect is the same as the n
- Night: it will automatically adjust the ISO value,
- Super Night: it will automatically adjust the ISO
- Chapter 5 Flight
- 1) As shown in figure, press the left and right st
- 2) Slowly push up the left stick.
- 1) Press and slide the one-click takeoff button (
- 2) The aircraft will automatically rise to the hei
- Class I: main airport & low-altitude area for mann
- Class II: Sensitive area or organization & militar
- Chapter 6 Maintenance and service
- Chapter 7 Technical Specification
When the aircraft battery level reaches 25% (low battery alarm), if the horizontal
distance between the aircraft and the return point is less than 50m, the aircraft will not
carry out the auto return process.
If there is no available GPS in the case of low battery alarm, the aircraft will not carry
out the auto return process. The aircraft will enter the ATTI mode and continue to be
controlled. When the battery level reaches 15% (serious low battery alarm), the aircraft
will land automatically.
In emergency, you can press the pause button ( ) or click the pause icon ( ) in
Autel Sky App to pause landing, and manually make the aircraft fly to the nearest safe
landing point.
3. Landing features
1) Landing protection
When the aircraft arrives above the return point, the landing protection function will be
activated to detect the ground environment. If the ground is flat, the aircraft will land
automatically. Otherwise it will hover on the spot to wait for the next instruction.
2) Precise landing
When the precise landing function is activated, the aircraft will scan and match the
topographic features. If the current topography is matched with that at the take-off point, it
will land as close to the take-off point.
Important
The aircraft will record the take-off point as the default return point. The precise landing
can take effect only when the return point is not refreshed during flight.
Select an open and well-lit area (such as grass lawn) as the take-off point.
When the aircraft is ready for precise landing, it is necessary to ensure that the take-off
environment has no change.