User manual

- Battery information: view battery temperature, battery health value, and the number of
discharges. Set low battery alarm, serious low battery alarm threshold, and turn on/off battery
protection mode (discharge every 3 days by default).
- Locate my drone: start the flashing light and beeping mode to find a missing aircraft.
- Advanced setting: turn on/off the vision-based obstacle avoidance system, obstacle detection
radar map, downward vision LED, aircraft LED indicator, and attitude mode takeoff.
2) Control
- Unit: Set default units to metric (km/h or m/h) or imperial (mph/h)
- Command stick mode: set the command stick mode as mode 1, mode 2, or mode 3.
- Flight mode: set the control speed of the aircraft and gimbal. Options include smooth mode,
standard mode, and ludicrous mode.
- RC customizable button: click or double-click the customizable button on the left to set a
custom function.
- RC calibration: follow the prompt steps to calibrate the remote controller. Calibration is
required when the flight attitude is inconsistent with the direction of the remote controller
stick.
- Gimbal setting: set the working mode (stabilized / FPV) and gimbal angle
(center/downward); activate gimbal calibration and gimbal manual adjustment, and enable
gimbal pitch adjustment upwards by 30°.
3) Shooting
- General setting: photo format (JPG/DNG/JPG+DNG), video format (MP4/MOV), video
encoding (H.265/H.264), storage location (Internal Memory/SD card), formatting. Select
settings such as audio recording during video recording, caching during video recording, and
camera reset.
- Shooting assist function: histogram, overexpose warning, grid, download aerial material,
defog, anti-flicker, and other settings.
4) Image transmission
- Image transmission mode: HD, smooth, 2.7K.
5) About
- View device serial number, firmware version, App version, and other information.