User manual

Table Of Contents
In the case of network outage during update, the update may be failed.
The whole update process will take more than ten minutes. The following situations may
occur in the aircraft during update: it is normal that the gimbal is weak, the status
indicator flashes abnormally, or the aircraft restarts; Please wait patiently for completing
firmware update.
Ensure that the aircraft and remote controller have the battery level of more than 30%.
After the firmware update, the flight control parameters such as return height and
distance limit of the aircraft will be reset. Please reset them after update.
6.2 Storage and maintenance
In order to ensure the optimal performance of EVO Lite, please read and abide by the
maintenance instruction of this section carefully.
Store the aircraft, battery and remote controller in a clean, dry, cool and well-ventilated
place.
Protect the aircraft from direct sunlight when it is not used.
Please wipe dry your two hands before operating the aircraft.
Clean the camera lens with the soft cloth with alcohol or gentle window cleanser. Do not
use any strong cleanser, detergent or chemical.
Keep the battery charger clear of other conducting materials.
Avoid the aircraft and its accessories falling, especially falling on a hard surface.
Carefully check all components after each collision or impact. Please contact the
customer support of Autel Robotics for any damage.
Only use the accessories authorized by Autel Robotics, such as charger. We will provide
no warranty for any accident due to the use of unapproved accessories.
6.3 Warranty
Autel Robotics Co., Ltd (hereinafter referred to as “the Company”) promises to the original
retail buyer of the product that: under the normal use condition, if the product or its any part is
certified to have defect in material or technology, causing equipment fault, then you can,
within the warranty period (calculated from the date of delivery), carry your proof of purchase
for free repair or replacement service by the Company.