Manual
Table Of Contents
- Chapter 1 Aircraft
- Chapter 2 Remote Controller
- Chapter 3 Smart Battery
- Chapter 4 Autel Enterprise App
- Chapter 5 First Flight
- 5.1 Instructions for First Flight
- 5.2 Flight Precautions
- 5.3 Pre-Flight Preparations
- 5.3.1 Unpacking
- 5.3.2 Charging
- 5.3.3 Preparing the Aircraft
- 5.3.4 Installing/Removing Propellers
- 5.3.5 Preparing the Remote Controller
- 5.3.6 Login, Pairing, Activation (activation only upon first use)
- 5.3.7 Novice Guide (first time use only)
- 5.3.8 Reconnect the aircraft (not required by default, required after disconnection)
- 5.4 Pre-Flight Inspection
- 5.5 Basic Flight Process
- Chapter 6 Firmware Update and Maintenance
- Appendix A Product Specifications
16 Chapter 2 Remote Controller
EVO Max 4T User Manual
5 Air Outlet
For heat dissipation of the remote controller. When using it,
please pay attention to whether there are foreign objects
blocking the air outlet.
6 HDMI Interface
Connect an HDMI cable to output video/audio, output the live
view of RC to a monitor or other device that can support HDMI.
7 Type-C Interface Used for remote controller charging or device debugging.
8
USB Type-A
Interface
Expandable 4G/5G module or external USB device for data
transmission.
9
Power Supply
Button
Long press for 3s to turn on/off the remote controller.
10
User-defined Key
C2
Use the Autel Enterprise App to customize the setting function,
see "4.3.3 Remote Controller Settings" in Chapter 4 Autel
Enterprise App for details.
11 Shooting Button Tap to take a photo.
12
Zooming Dial
Wheel
Turn the thumbwheel to adjust the zoom factor of the camera.
13
Right Command
Stick
Default operation mode: control the translation of the aircraft in
four directions: front/back/left/right.
2.1.2 Remote Controller Front View
Figure 2-2 Remote Controller Front View
Table 2-2 Remote Controller Front View Details
No. Name Description
14 Antenna Communicates with aircraft via 2.4GHz/5.8GHz
15
Battery Level
Indicator
Displays the remaining remote controller battery level.