Manual

Chapter 2 Remote Controller 29
EVO Max 4T User Manual
automatic return-to-home, then manually assume control to land.

Short press the pause button "
"
on the remote controller to suspend a return, short
press again to resume; long press to exit the return process.
The automatic return-to-home function will only be enabled when the GNSS signal is
sufficient. To manually activate the automatic return-to-home function, press and hold the
return-to-home button "
" on the remote controller for 2 seconds. After receiving the
command, the aircraft will automatically return and land at the preset home point. EVO Max 4T
can use its obstacle avoidance system to detect and avoid obstacles in the route. When the
aircraft is in the return-to-home state, the remote controller will be disabled, and you can short
press the pause button "
" to reactivate it.
Table 2-13 Auto Return-to-Home Trigger Condition
No.
Trigger the RTH
Scene
Description
1
Return-to-Home
Instruction sent via
App
App directly sends the return command to the aircraft.
2
Smart Low Power
Return-to-Home
According to the current altitude and distance of the aircraft,
calculate the return power.
⮚ If the calculated return home battery is insufficient, it will
trigger a smart low-battery return-to-home;
⮚ If the calculated return-to-home battery is sufficient, a
low-battery return-to-home will be triggered.
By default, it waits for 6 seconds, and the App pops up a
prompt to return or cancel. If there is no selection, it will
return to home automatically after 6 seconds.
3
Low Battery
Return-to-Home
4
Emergency Low
Power Landing
Landing on the spot does not support artificially interrupting
the return flight.
5
Remote Controller
Loses Connection and
Return-to-Home
When the remote controller is disconnected from the
aircraft, automatic return can be triggered according to the
settings.
Table 2-14 Auto Return-To-Home Mechanism
Aircraft distance when the
return mechanism is triggered
Return-to-Home Mechanism
≤10m from Home point The aircraft returns to home at the current altitude.
10m< distance from the Home
point≤25m
If the current aircraft altitude is lower than 20m, the
aircraft will ascend to 20m altitude and return to home;
If the current altitude of the aircraft is higher than 20m,
the aircraft will return to home at the current altitude.