Manualshelf

Users Manual Part 1

ManualsBrandsAutel ManualsElectronicsMaxiFlash VCI
31323334353637383940
28
To print data in Diagnostics
1. Tap the Diagnostics application button on the MaxiSys Job Menu. The Print
button on the diagnostic toolbar is available throughout the Diagnostics
operations.
2. Tap Print and a drop-down menu displays.
a) Print This Page – prints a screenshot copy of the current screen.
b) Print All Data – prints a PDF copy of all displayed data.
3. A temporary file will be created and sent via the computer to the printer.
4. When the file is sent, a confirmation message displays.
NOTE
Make sure the tablet and the printer are connected either by Wi-Fi or LAN before
printing. For more instructions on printing, see Print on page 256 for details.
To submit Data Logging reports in Diagnostics
1. Tap the Diagnostics application button from the MaxiSys Job Menu. The
pen-shaped Data Logging button on the diagnostic toolbar is available
throughout the whole Diagnostics operations.
2. Tap the Data Logging button (a pen icon) to open a selection box. Select from
a list of errors to generally describe the problem encountered. A blue check
mark will display adjacent to the error selected. Tap OK to continue.
3. A submission form will display to let you fill in the report information.
4. Tap the Send button in the upper right corner of the screen to submit the
report form via the Internet, a confirmation message displays when sent
successfully.
Status Information Bar
The Status Information Bar at the top of the Main Section displays the following items:
1. VCMI Icon – indicates the communication status between the tablet and the VCMI
device.
2. Battery Icon – indicates the battery status of the vehicle.
Main Section
The Main Section varies depending on the stage of operations which shows vehicle
identification selections, the main menu, test data, messages, instructions and other
diagnostic information.
The Main Section can display as two format types, a topology map and a listing of
vehicle modules.
A. Topology Tab Page
The Topology Tab Page displays a system distribution diagram of the vehicle
control modules.