User Manual

ManualsBrandsAutel ManualsAutomotiveAP200C MaxiAP 2021 Newest OBD2 Scanner with ABS Auto Bleed, Airbag Reset, Oil, Throttle, DPF, EPB, SAS, BMS Services in-App Purchase, ABS/SRS Diagnosis, for iOS & Android, Specific Vehicles

CONTENTS

1 GENERAL INTRODUCTION .......................................................................................... 1

FUNCTIONAL DESCRIPTION ................................................................................................. 1

TECHNICAL SPECIFICATIONS ............................................................................................... 2

WIRELESS COMMUNICATION ............................................................................................... 3

POWER SOURCE ............................................................................................................... 3

2 GETTING STARTED ...................................................................................................... 4

POWERING UP .................................................................................................................. 4

FUNCTION BUTTONS .......................................................................................................... 6

NAVIGATION BUTTONS ....................................................................................................... 7

3 EOBD.............................................................................................................................. 8

EXITING DIAGNOSTICS...................................................................................................... 10

4 SERVICE ...................................................................................................................... 12

ANTILOCK BRAKE SYSTEM (ABS)...................................................................................... 12

SUPPLEMENT RESTRAINT SYSTEM (SRS) .......................................................................... 13

OIL RESET SERVICE ........................................................................................................ 14

ELECTRONIC PARKING BRAKE (EPB) SERVICE ................................................................... 14

BATTERY MANAGEMENT SYSTEM (BMS) SERVICE .............................................................. 15

DIESEL PARTICULATE FILTER (DPF) SERVICE .................................................................... 15

STEERING ANGLE SENSOR (SAS) SERVICE ....................................................................... 16

THROTTLE MATCH SERVICE .............................................................................................. 17

5 HISTORY ...................................................................................................................... 18

6 REPAIR REPORTS ...................................................................................................... 19

7 MALL ............................................................................................................................ 20

PURCHASE SERVICE SOFTWARE ........................................................................................ 20

8 ME ................................................................................................................................ 21

ORDER MANAGER............................................................................................................ 21

DELETE VEHICLE ............................................................................................................. 21

DATA LOGGING................................................................................................................ 21

VCI CONNECTION ............................................................................................................ 22

VCI MANAGER ................................................................................................................ 22

SETTINGS ....................................................................................................................... 22

Summary of content (26 pages)

PAGE 1
CONTENTS 1 GENERAL INTRODUCTION ..........................................................................................1 FUNCTIONAL DESCRIPTION .................................................................................................1 TECHNICAL SPECIFICATIONS ...............................................................................................2 W IRELESS COMMUNICATION ...............................................................................................3 POWER SOURCE .........
PAGE 2
USER MANUAL ................................................................................................................ 22 9 PRODUCT TROUBLESHOOTING ............................................................................... 23 VEHICLE LINKING ERROR ..................................................................................................23 10 WARRANTY AND SERVICE ........................................................................................ 24 LIMITED ONE YEAR W ARRANTY........
PAGE 3
1 General Introduction Equipped with ABS and SRS systems, the MaxiAP AP200C is a code reader & service tool to easily perform 8 most common maintenance services, including Oil Reset, EPB, BMS, DPF, SAS, Throttle Match, ABS Bleed and Airbag Reset for almost all vehicle makes and models. The MaxiAP AP200C package includes a Bluetooth (BT) dongle and a MaxiAP200 app. It is used to connect to a vehicle’s OBDII port and connect with an Android or iOS device for quick and easy service functions.
PAGE 4
Bluetooth.  Flashes blue when the device is communicating with the MaxiAP AP200C, for example, when the device is reading Engine DTCs. C. Red 3.  Lights solid red when the MaxiAP AP200C is updating the firmware or when the update failed, or when the MaxiAP AP200C is locked.  Flashed red fast when the communication failed between the device and the dongle via Bluetooth. Please restart the dongle until it works properly. Strap Hole – attach the strap to the MaxiAP AP200C.
PAGE 5
Wireless Communication The MaxiAP AP200C uses BT communication. It can transmit vehicle data to your Android or iOS device. The working range for BT communication is about 33 feet (about 10 m). Signal lost due to moving out of range will automatically be restored once the device is brought within transmission range to the MaxiAP AP200C connector. Power Source The MaxiAP AP200C operates on 12-volt vehicle power that it receives through the vehicle data connection port.
PAGE 6
2 Getting Started NOTE The images and illustrations depicted in this manual may differ slightly from the actual ones. The user interfaces for iOS & Android devices might be slightly different. This manual uses UI for iOS devices as an example. Powering Up 1. Download & install app  2. 3. Scan the QR code or search for MaxiAP200 in App Store or Google Play to download and install the app to your device. Register & Log in  Open the MaxiAP200 app and tap Register near the top right of the screen.
PAGE 7
download the vehicle make of your selection. 5. Plug the connector of the MaxiAP200C Bluetooth dongle into the vehicle's OBDII port.  6. Turn the vehicle ignition to Key On, Engine Off position.  7. The vehicle's OBDII port is generally located under the vehicle dashboard (Consult vehicle user manual for specific location). The LED on the dongle will light solid green when connected. VCI Connection For Android devices, tap Me > VCI Connection or the VCI button near the top right of the Home screen.
PAGE 8
Figure 2-1 Sample MaxiAP200C Job Menu  ① Dynamic Rotation Banner – display information about other popular Autel products, tap the banner to visit the product page on Autel websites, www.autel.com or www.maxitpms.com.  ② Application Buttons  ③ Navigation Buttons Function Buttons The table below briefly describes each of the application buttons in the AP200C system. Table 2-1 Application Buttons Button Name Description EOBD Accesses full OBDII/EOBD functions.
PAGE 9
AP200CUSA For iOS devices, this icon will display on the device's desktop after purchasing and installing the U.S. and European vehicle data package. Tap on the icon to start vehicle maintenance. AP200CAsia For iOS devices, this icon will display on the device's desktop after purchasing and installing the Asian and Audi vehicle data package. Tap on the icon to start vehicle maintenance.
PAGE 10
3 EOBD A fast-access option for OBD II/EOBD vehicle diagnosis is available on the Home screen. This option presents a quick way to check for DTCs, isolate the cause of an illuminated malfunction indicator lamp (MIL), check monitor status prior to emissions certification testing, verify repairs, and perform a number of other services that are emissions-related. The OBD direct access option is also used for testing OBD II/EOBD compliant vehicles that are not included in the Diagnostics database.
PAGE 11
DTC & FFD When this function is selected, the screen displays a list of Stored Codes and Pending Codes. When the Freeze Frame data of certain DTCs are available for viewing, a snowflake button will display on the right side of the DTC item. The erase codes function can be applied by tapping the Clear DTC button at the bottom of the screen.  Stored Codes Stored codes are the current emission related DTCs from the ECM of the vehicle.
PAGE 12
I/M Readiness This function is used to check the readiness of the monitoring system. It is an excellent function to use prior to having a vehicle inspected for compliance to a state emissions program. Selecting I/M Readiness opens a submenu with two choices:  Since DTCs Cleared – displays the status of monitors since the last time the DTCs are erased.  This Driving Cycle – displays the status of monitors since the beginning of the current drive cycle.
PAGE 13
NOTE Damage to the vehicle electronic control module (ECM) may occur if communication is disrupted. Make sure the wireless connection is properly connected at all times during testing. Exit all tests before disconnecting the test connection or powering down the tool.
PAGE 14
4 Service The Service section is specially designed to provide you with quick access to the vehicle systems for various scheduled service and maintenance performances. The typical service operation screen is a series of menu driven executive commands. By following the on-screen instructions to select appropriate execution options, enter correct values or data, and perform necessary actions, the system will guide you through the complete performance for various service operations.
PAGE 15
Read Codes: This function allows user to read the ABS DTCs from vehicle ECU. Erase Codes: This function allows user to erase the ABS DTCs in vehicle ECU. Live Data: This function enables you view ABS-related data readings from a selected ECU. Hot Functions The function name vary with the vehicles being tested. The ABS brake bleeding function allows you to check the operating conditions of the anti-lock braking system.
PAGE 16
Oil Reset Service This function allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required. IMPORTANT Always reset the engine oil life to 100% after every oil change. NOTE All required work must be carried out before the service indicators are reset.
PAGE 17
Battery Management System (BMS) Service The BMS (Battery Management System) allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle. NOTE 1. This function is not supported by all vehicles. The screens shown in this section are examples. 2.
PAGE 18
In the event of the car being driven in such a way that regeneration is not possible, i.e. frequent short journeys, a diagnostic trouble code will eventually be registered, DPF light and “Check Engine” indicator comes on. A service regeneration can be requested in the workshop, using the diagnostic tool. Before carrying out a forced DPF regeneration using the tool, check the following items:  The fuel light is not on.  No DPF-relevant faults stored in system.
PAGE 19
 Any maintenance that involves opening the connector hub from the steering angle sensor to the column  Any maintenance or repair work on the steering linkage, steering gear or other related mechanism  Wheel alignment or wheel track adjustment  Accident repairs where damage to the steering angle sensor or assembly, or any part of the steering system may have occurred NOTE 1. AUTEL accepts no responsibility for any accident or injury arising from servicing the SAS system.
PAGE 20
5 History This function stores records of test vehicle history, including vehicle information and the retrieved DTCs from previous diagnostic and service sessions, and displays all information in an easy-to-check table list, on which you can view summarized details and manually input other information about the test vehicle and services performed, etc.
PAGE 21
6 Repair Reports The MaxiAP AP200 app can save repair report for EOBD diagnostic and maintenance service sessions. A PDF can also be generated for easy viewing, sharing, and printing. After finishing vehicle diagnosis and maintenance service, tap Save to create a repair report. The repair report is saved under Repair Reports.
PAGE 22
7 Mall This function button provides you a quick entrance to access app built-in mall and purchase the software. Follow the instructions to download the free ABS and SRS system functions, which are valid for up to a year. Additional services are also available with in-app purchase. Figure 7-1 Sample Mall Screen Purchase service software NOTE Before purchasing the service software, you have to log in your Autel ID and bind the MaxiAP AP200C device with your account.
PAGE 23
8 Me Tap the Me button, a list of functions displayed, including Order Manager, Delete Vehicle, Data Logging, VCI Connection, VCI Manager, Settings and User Manual. Figure 8-1 Sample Me Screen Order Manager This function can help you manage orders efficiently. Delete Vehicle Tap the Delete Vehicle option, a list of installed Apps will display. There is a Trash icon on the top right of the screen. Tap on the icon of unwanted Apps to select and tap Trash icon to uninstall.
PAGE 24
VCI Connection Be sure that the VCI is connected all time for successful communication. For detailed operation, please see Powering Up on page 4. VCI Manager Tap the VCI Manager, the information of Serial Number, Bind Date, Bind Account and Firmware Version will display. Tap Detect Firmware button to check the new version of firmware and upgrade it. Settings Select the Settings application to open a setup screen to adjust the default setting and view information about the MaxiAP AP200C system.
PAGE 25
9 Product Troubleshooting This chapter describes problems that you may encounter while using the MaxiAP AP200C. Vehicle Linking Error A communication error occurs if the MaxiAP AP200C fails to communicate with the vehicle’s control module when performing service procedures. Please do the following check-ups:  Verify that the ignition is ON.  Check that the MaxiAP AP200C connector is securely connected to the vehicle’s OBDII port.  Turn the ignition off and wait for about 10 seconds.
PAGE 26
10 Warranty and Service Limited One Year Warranty Autel Intelligent Technology Corp., Ltd.