User Manual

13
Read Codes: This function allows user to read the ABS DTCs from vehicle ECU.
Erase Codes: This function allows user to erase the ABS DTCs in vehicle ECU.
Live Data: This function enables you view ABS-related data readings from a selected
ECU.
Hot Functions
The function name vary with the vehicles being tested. The ABS brake bleeding function
allows you to check the operating conditions of the anti-lock braking system.
Supplement Restraint System (SRS)
SRS - Supplemental Restraint System is made up of Impact Sensors, a Control Module,
and Airbags. When the impact sensors detect a collision they send an extremely fast
signal to the control module, which relays that signal to the airbags, deploying them to
help prevent vehicle occupants from hitting interior objects such as steering wheels,
dashboards, and the like. When the control module detects a problem with the airbags
or sensors the Malfunction Indicator Light (MIL) will turn on.
To perform functions in the SRS system, tap the SRS icon on the Service page, manually
select a vehicle make, and then tap the Diagnosis or hot function section to choose the
specific function you preferred.
Diagnosis
There are three options in the Diagnosis section of SRS system:
Read Codes: This function allows user to read the SRS DTCs from vehicle ECU.
Erase Codes: This function allows user to erase the SRS DTCs in vehicle ECU.
Live Data: This function enables you view SRS-related data readings from a selected
ECU.
Hot Functions
The function name vary with the vehicles being tested. The Airbag reset service allows
you to check the functioning status of the supplement restraint system.
After the airbag related components are replaced, it is necessary to perform this
operation to clear the fault entries in the ECU and eliminate the related faults.