User Manual

25
Automatic Selection
The Auto VIN Scan can be selected after selecting the test vehicle
manufacturer.
 To perform Automatic Selection
1. Tap the Diagnostics application button from the MaxiCOM Job
Menu. The Vehicle Menu displays.
2. Tap the manufacturer button of the test vehicle.
3. Tap Automatic Selection and the VIN information will be acquired
automatically. Follow the on-screen instruction to display the
diagnostic screen.
Manual Selection
When the vehicle’s VIN is not automatically retrievable through the
vehicle's ECU, or the specific VIN is unknown, the vehicle can be
manually selected.
This mode of vehicle selection is menu driven, repeat the first two steps
from the automatic selection operation and tap Manual Selection.
Through a series of on-screen prompts and selections, the test vehicle is
chosen. If needed, press the Back button at the bottom right corner of the
screen to return to previous screen.
Figure 4- 7 Sample Selection Screen