User Manual

12
3 Getting Started
Make sure the tablet has sufficient power or is connected to the external power supply
(see Power Sources on page 5).
Power Up
Long press the Lock/Power button on the top right side of the tablet to switch the unit on.
The power LED will illuminate green. The system boots up and displays the lock screen.
Press and drag the inner ring to the edge of the circle to unlock the screen; the MaxiSys
Job Menu is shown.
Figure 3-1 Sample MaxiSys Job Menu
1. Application Buttons
2. Locator and Navigation Buttons
3. Status Icons
NOTE
The screen is locked by default upon startup. It is recommended to lock the screen
when not in use to protect information in the system and conserve the power.
Almost all operations on the tablet are controlled through the touch screen. The touch
screen navigation is menu driven, which allows you to quickly locate the test procedure,
or data that you need, through a series of choices and questions. Detailed descriptions
of the menu structures are found in the chapters for each application.