User Manual

31
Column 3 – displays the diagnostic marks indicating different conditions of the test
result.
 -!-: Indicates that the scanned system may not support the code reading
function, or there is a communication error between the tester and the control
system.
 -?-: Indicates that the vehicle control system has been detected, but the
tester cannot accurately locate it.
 Fault | #: Indicates there is/are detected fault code(s) present; “#” indicates
the number of the detected faults.
 Pass | No Fault: Indicates the system has passed the scanning process
and no fault has been detected.
B. Tree Tab
The tree tab screen displays a system distribution diagram of the vehicle control
modules. The scanned system which has passed scanning with no fault is shown in
blue font; whereas the scanned system that has been detected with fault present is
shown in red font.
➢ Tab the button to the right of the system item, on which you want to perform
further diagnosis and other test activities. A Function Menu screen (Figure 4-8)
shall then display.
Functional Buttons
The table below provides a brief description of the Functional Buttons’ operations in
Auto Scan:
Table 4-3 Functional Buttons in Auto Scan
Name
Description
Back
Returns to the previous screen or exit Auto Scan.
Pause
Suspends scanning and changes to show the Continue
button.
OK
Confirms the test result, and continues to the system
diagnosis after selecting the required system by tapping the
item in the Main Section.
Quick Erase
Deletes codes. A warning message screen will display to
inform you of possible data loss when this function is
selected.
Report
Displays the diagnostic data in the report form.
Save
Saves the diagnostic session as a history record, this allows
you to quickly restore access to the test systems.