User Manual

make selection of an item. Tap the check box again to deselect the item.

b) Drop-down Button – tap the drop-down button at the right side of the

parameter name to open a submenu, which provides optional modes by

which to display the data.

⚫ Value Column – displays the values of the parameter items.

⚫ Range Column – displays the minimum and the maximum limit value.

⚫ Unit Column – displays the unit for the parameter values.

➢ To change the Unit mode, tap the Setting button on the top toolbar and

select a required mode. See Unit on page 74.

3. Display Mode

There are four types of display modes available for data viewing, allowing you to view

various types of parameters in the most suitable way for better data check-ups.

Tap the drop-down button on the right side of the parameter name opens a submenu.

There are 4 buttons to configure the data display mode, plus one Help button on the

right, active when additional information is available for your reference.

Each parameter item displays the selected mode independently.

 Analog Gauge Mode – displays the parameters in form of an analog meter graph

 Text Mode – the default mode that displays the parameters in texts and shows in

list format.

NOTE

Reading of status parameters, such as a switch reading, which are mostly in word form,

such as ON, OFF, ACTIVE, and ABORT can only be displayed in Text Mode. Whereas

reading of value parameters, such as a sensor reading, can be displayed in text mode

and graph modes.

 Waveform Graph Mode – displays the parameters in waveform graphs.

When displaying this mode, three control buttons will appear on the right side of

the parameter item, allowing you to manipulate the display status.

⚫ Text Button – resumes Text Display Mode.

⚫ Scale Button – changes the scale values, which are displayed below the

waveform graph. There are four scales available: x1, x2, x4 and x8.

⚫ Zoom-in Button – taps once to display the selected data graph in full screen.

 Digital Gauge Mode – displays the parameters in form of a digital gauge graph.

 Full Screen Display – this option is only available in the waveform graph mode,

and mostly used in Graph Merge status for data comparison. There are three

control buttons available on the top right side of the screen under this mode.

⚫ Edit Button – tap to open an edit window, on which you can set the waveform

color and the line thickness displayed for the selected parameter item.