User Manual

129
Chapter 17 Maintenance and Service
To ensure that the MaxiSys diagnostic tablet and the combined VCI unit perform at their
optimum level, we advise that the product maintenance instructions covered in this
section is read and followed.
17.1 Maintenance Instructions
The following shows how to maintain your devices, together with precautions
to take.
 Use a soft cloth and alcohol or a mild window cleaner to clean the touch
screen of the tablet.
 Do not use any abrasive cleansers, detergent, or automotive chemicals
to the tablet.
 Maintain the devices in dry conditions and keep them within normal
operating temperatures.
 Dry your hands before using the tablet. The touch screen of the tablet
may not work if the touch screen is moist, or if you tap the touch screen
with wet hands.
 Do not store the devices in humid, dusty or dirty areas.
 Check the housing, wiring, and connectors for dirt and damage before
and after each use.
 At the end of each work day, wipe the device housing, wiring, and
connectors clean with a damp cloth.
 Do not attempt to disassemble your tablet or the VCI unit.
 Do not drop or cause severe impact to the devices.
 Use only authorized battery chargers and accessories. Any malfunction
or damage caused by the use of unauthorized battery charger and
accessories will void the limited product warranty.
 Ensure that the battery charger does not come in contact with conductive
objects.
 Do not use the tablet beside microwave ovens, cordless phones and
some medical or scientific instruments to prevent signal interference.