User Manual

Diagnostics Operations Service
49
3. The third part displays the current conditions of the vehicle control
module being learned for comparison to the preconditions suggested by
the second part. If the current condition of the control module is out of the
suggested limit value, then it must be adjusted to meet the requirement.
4. The last part displays the instruction of how to use the functional button
at the lower right corner of the screen to manipulate the teach-in
operations.
Figure 4-14 Sample Adaptation Operation Screen
Read the information carefully and check the vehicle condition accordingly,
when you are sure that the vehicle is ready to perform the adaptation, simply
follow the instruction provided to make appropriate selections. When the
operation is done, an execution status message such as Completed, Finished
or Successful, displays.
Tap the ESC button to exit the function.
4.7 Service
The Service section is specially designed to provide you quick access to the
vehicle systems for various scheduled service and maintenance performances.
The typical service operation screen is a series of menu driven executive
commands. By following the on-screen instructions to select appropriate
execution options, enter correct values or data, and perform necessary
actions, the system will guide you through the complete performance for
various service operations.