User Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabili
- For Services and Support
- Safety Information
- Safety Messages
- Safety Instructions
- 1 Using This Manual
- 2 General Introduction
- 3 Getting Started
- 4 Diagnostics
- 5 Service
- 6 Data Manager
- 7 Settings
- 8 Update
- 9 VCI Manager
- 10 Shop Manager
- 11 Academy
- 12 Remote Desk
- 13 MaxiFix
- 14 Support
- 15 Quick Link
- 16 Function Viewer
- 17 Maintenance and Service
- 18 Compliance Information
- 19 Warranty
30
of the test vehicle.
After a selection is made and the tablet establishes communication with
the vehicle, the corresponding function menu or selection menu displays.
Auto Scan
The Auto Scan function performs a comprehensive scanning over all the
ECUs in the vehicle’s ECU to locate systems faults and retrieve DTCs. An
example of Auto Scan interface is pictured as below:
1. Navigation Bar
2. Main Section
3. Functional Buttons
Navigation Bar
List Tab – displays the scanned data in list format.
Progress Bar – indicates the test progress.
Main Section
Column 1 – displays the sequence numbers.
Column 2 – displays the scanned systems.
Column 3 – displays the diagnostic indicators describing test results:
Figure 4- 9 Sample Auto Scan Operation Screen