User Guide

ManualsBrandsAutel ManualsAutomotiveMaxiBAS BT608 Battery Tester, 2021 Car Battery Cranking Starter Alternator Diagnostic, Intelligent Automotive Battery Registration, Read Erase Code, with Clamp & Paper Roll, Upgraded BT508

ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES

QUICKSTART GUIDE

MaxiBAS BT608

Please be advised this tool ships with minimal, non-vehicle specic software.

To download software to use on the vehicles you service, the tool must be registered rst.

Please follow the following steps:

1. Register Tool

1.1 Registration Via Tool

1.2 Registration Via a Windows-based PC

2. Download Software

3. Download BAS Firmware

4. Pair VCI to Tablet

4.1 Pair Tablet with VCI Via Bluetooth

4.2 Check for VCI Firmware

5. Print via Windows PC to Wi-Fi Printer

Contents

Summary of content (8 pages)

PAGE 1
MaxiBAS BT608 QUICKSTART GUIDE Please be advised this tool ships with minimal, non-vehicle specific software. To download software to use on the vehicles you service, the tool must be registered first. Please follow the following steps: Contents 1. Register Tool 1 1.1 Registration Via Tool 2 1.2 Registration Via a Windows-based PC 3 2. Download Software 4 3. Download BAS Firmware 5 4. Pair VCI to Tablet 5 4.1 Pair Tablet with VCI Via Bluetooth 5 4.2 Check for VCI Firmware 6 5.
PAGE 2
MaxiBAS BT608 QUICKSTART GUIDE 1. REGISTER TOOL 1 2 • Power on the BT608. Swipe down from the top of the screen and a drop-down menu will display. • Long press the WLAN icon to enter the WLAN setting menu. • Swipe the WLAN toggle to turn on the Wi-Fi. • Select your network and enter password to sign in. 3 - The Wi-Fi icon will display at the top right corner of the screen when connection is established.
PAGE 3
MaxiBAS BT608 QUICKSTART GUIDE 1. REGISTER TOOL 1.1 REGISTRATION VIA TABLET 1 2 • After the device is connected to Wi-Fi, access Update - A dialog box will display asking you to register your tool. • Tap OK.
PAGE 4
MaxiBAS BT608 QUICKSTART GUIDE 1. REGISTER TOOL 1.2 REGISTRATION VIA A WINDOWS-BASED PC 1 2 • Using a computer, launch an Internet browser and go to http://pro.autel.com • Click Create Autel ID on the left side of the screen • If you already have an Autel ID, sign in and skip to Step 6 3 • Set preferred language • Enter your email address as Autel ID • Click Get Verification Code 4 Captcha code - An email titled “Verification Code for New User Registration” will be sent to you.
PAGE 5
MaxiBAS BT608 QUICKSTART GUIDE 2. DOWNLOAD SOFTWARE 1 2 • Download the system update by selecting the Download button on the right. - If updates are available, the number of available updates will display above the green Update button • Select the Update button to view a list of available updates.
PAGE 6
MaxiBAS BT608 QUICKSTART GUIDE 3. DOWNLOAD BAS FIRMWARE 1 • Select Settings from the main screen and tap BAS management • On the Firmware tab page, select Detect Firmware. 2 - A dialog box will display when new firmware version is available. • Select Get the new version to download the new BAS firmware. 4. PAIR VCI TO TABLET 4.1 PAIR TABLET WITH VCI VIA BLUETOOTH 1 • Connect the VCI to a vehicle or USB power source • Select Settings from the main screen and tap VCI manager.
PAGE 7
3 - A green bluetooth icon will display when the tool and VCI are paired. 4. PAIR VCI TO TABLET 4.2 CHECK FOR VCI FIRMWARE 1 • Connect the VCI to a vehicle and turn ignition on. • Select Settings from the main screen and tap VCI manager • On the Firmware upgrade tab page, select Detect Firmware 2 - A dialog box will display when new firmware version is available. • Select Get the new version to download the new VCI firmware.
PAGE 8
MaxiBAS BT608 QUICKSTART GUIDE 5. PRINT VIA WINDOWS PC TO WI-FI PRINTER Works with any printer with a Wi-Fi connection. No need for special software or driver on the tablet. 1 2 • Make sure your Window PC and tablet are on the same Wi-Fi network • On your computer, go to Autel.com, select Support > Downloads > Autel Update Tools 3 • Locate the MaxiSYS PC Suite software and click on the Download Here button • Open the zip file 4 • Select MaxiSYS Print, then click the setup.