Software Update Instructions for Diaglink Register the Tool: 1. Please go to Autel website www.autel.com to register an Autel ID; 2.
3. After creating a new Autel ID, go back to the Home page and Sign in with your Autel ID and password. You will see the following pages. 4. Please select Diaglink, fill in the Serial No. and Register Password to register this scanner to your Autel ID. Note: Please make sure that you put the right serial number and register password. You can check the serial No. from the back of the scanner and also you can find them from the scanner itself, open this scanner, go to Setup->About to check them.
6. Install the PC Suite on a Windows computer that can get Internet access. Update Procedure Note: To ensure the updating process runs smoothly, we highly suggest you to use Card Reader to load the SD card to do the updating, instead of USB cable. 1. Please load the SD card to USB port of the computer via a SD card reader, run the PC suite and it will automatically recognize the Serial number and Register password to get into next page.
2. Select the latest version of System Program and click Update, wait for the downloading finished. 3. If you have never downloaded any software package, the Updates window will show as below. Find out the desired updating item and click Update button in the same line.
4. In a popped dialog box, enter your Autel ID and your password, and click OK 5.
. To update other programs, please click Purchase button on the right side of screen and purchase your desired updating items on http://pro.auteltech.com/. Note: Please make sure the card reader is removed safely. Then, insert the SD card back to the tool and you can enjoy the new software.