User Manual

23
Figure 5.14
5.2 Diagnostic Test
After you have entered the correct vehicle information, the diagnostic
testing selection will display as below:
Figure 5.15
5.2.1 Auto Scan
Depending on the scan tool model, Auto Scan function will carry out
an overall scan to check the status of all systems or four systems
(engine, transmission, airbag and ABS) on the vehicle being tested.
Selecting Auto Scan will lead to retrieve the trouble codes in each
system of the vehicle one by one. It will take a few minutes to display.
Use the UP/DOWN scroll button to select Auto Scan from Main
Groups menu (Figure 5.15), and press the OK button.
Select An Option
1. Auto Scan
2. Control Unit
3. Vehicle Information