User Manual

75
1) In the Diagnostic Menu (Figure 8.19), use the UP/DOWN
button to select Active Test to do the 8.test. The scan tool
displays as below.
Figure 8.21
2) In the Active menu, use the UP/DOWN button to select the
desired actuator to begin test. If the selected actuator works
correctly, the tool will display a confirmation message as below
(Figure 8.22). Otherwise, it will display a message to remind
user of a problem. After you exit the diagnosis program, please
repair the problem immediately.
Figure 8.22
Active
1. ABS/ASR recirculation pump
2. Left front intake solenoid valve
3. Right front intake solenoid valve
4. Left rear intake solenoid valve
5. Right rear intake solenoid valve
6. Switching solenoid valve 1
7. Switching solenoid valve 2
Active
Operation completed!
No fault detected!
Press any key to continue