User guide

38
 If the vehicle under test does not support the mode, an
advisory message will be displayed on the screen. (Figure
5.28)
Figure 5.28
 For CAN-equipped vehicles, test selections can be as below:
Figure 5.29
6) Use the UP/DOWN scroll button to select the desired monitor
from On-Board Monitor Test menu and press the OK button.
7) View test data on screen.
Figure 5.30
On-Board Monitor Test
The selected mode is
not supported
Press any key to continue
On-Board Monitor Test ..
1. EGR Monitor
2. Mis-Fire Monitor Data
3. Mis-Fire Cylinder 1 Data
4. Mis-Fire Cylinder 2 Data
5. Mis-Fire Cylinder 3 Data
6. Mis-Fire Cylinder 4 Data
Test $01 Data
ID
11
Module
$10
Test Value
0400
Min Limit
0200
Max Limit
----
Status
OK