User guide

54
8) In the Diag. Menu screen, use the UP/DOWN button to select
Active Test, and press the OK button.
Figure 7.3
A. Installation position of brake cables
This function allows you to adjust the brake cables safely. After
you select this function, the tool will prompt you a safety
message.
Figure 7.4
Press OK button to confirm that you have read this information.
The tool shows as below. Press ON function key to activate the
test.
Active Test
1.Installation position of brake cables
2.Operate parking brake
.
Installation position of brake cable
Risk of injury caused by moving parts
that can pinch, crush or in extreme cases
even sever limbs!
that can pinch, crush or in extreme cases
Rules of conduct and protective measures
-Ensure that there is no risk of the
parking brake being operated after
OK Cancel
.