Specifications

Autel Intelligent Tech. Corp., Ltd
GOC-Q82008W V1.2 Bluetooth Module Hardware Specification
Autel Intelligent Tech. Corp., Ltd
18
12. Packaging Information
12.1 Net Weight
The module net weight: 2g±0.2g
12.2 Package
TBD
12.3 Storage Requirements
1）Temperature: 22~28°C ；
2 ）Humidity: <70%（ RH）；
Vacuum packed and sealed in good condition to ensure 12 months of welding.
12.4 Humidity Sensitive Characteristic
1） MSL: 3 level
2） Once opened, SMT within 168 hours in the condition of temperature: 22~28°C and
humidity<60%(RH).
3） Handling, storage, and processing should follow JEDEC J-STD-020
13.Statement
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside of
the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use
wording such as the following: “Contains FCC ID:WQ8-GOCQ82008W” any similar wording that expresses the same meaning may be
used. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Canada Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Please notice that if the ISED certification number is not visible when the module is installed inside another device, then the outside of
the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use
wording such as the following: “Contains IC:10826A-GOCQ82008W” any similar wording that expresses the same meaning may be
used.l'appareil hôte doit porter une étiquette donnant le numéro de certification du module d'Industrie Canada, précédé des mots «
Contient un module d'émission », du mot « IC:10826A-GOCQ82008W» ou d'une formulation similaire exprimant le même sens.