Product Specs

9
Getting Started
Ensure the BT609 is sufficiently charged or is connected to the external power
supply.
Inspect the Battery
Before starting a test, observe the battery for:

Cracking, buckling, or leaking. If you see any of these defects, replace the
battery.

Corroded, loose, or damaged cables and connections. Repair or replace
as needed.

Corrosion on the battery terminals, and dirt or acid on the case top. Clean
the case and terminals using a wire brush and a mixture of water and
baking soda.
IMPORTANT
Please ensure that the BT609 and the MaxiVCI V200 are powered ON when
binding the devices and during battery registration.
Power Up
Long press the Lock/Power button to turn on the BT609. The first time you use
the device, a message will pop up asking you to register the device. Follow on-
screen instructions to create an Autel ID and complete the registration.
Software & Firmware Update
 Software Update: connect the BT609 to the Internet and tap Update in
the Main Menu to check all the available updates.
 Firmware Update: connect the BT609 to the Internet and tap Settings in
the Main Menu, select VCI Manager and tap Firmware Upgrade. Follow