User Manual

106
Figure 9.28
4) Select Save option to store the codes or press ESC button to exit
without saving.
Erase Codes
This function allows user to erase the SRS DTCs in vehicle ECU.
NOTE: If you plan to take the vehicle to a Service Center for
repair, DO NOT erase the SRS DTCs from the vehicle’s computer.
If the codes are erased, valuable information that might help the
technician troubleshoot the problem will be erased.
1) From the diagnostic function menu (Figure 9.26) use the
UP/DOWN scroll button to select Diagnostic Trouble Codes
and press the OK button.
2) Use the UP/DOWN scroll button to select Clear DTC
Information and press the OK button (Figure 9.27).
3) A warning message will come up asking your confirmation.