User Manual

114
2) View DTCs and their definitions on screen.
Figure 10.3
3) Select Save option to store the codes or press ESC button to exit
without saving.
10.2 Erase Codes
This function allows user to erase the SAS DTCs in vehicle ECU.
1) From the function menu (Figure 10.2) use the UP/DOWN scroll
button to select Erase Codes and press the OK button.
2) A warning message will come up asking your confirmation.
Figure 10.4
3) Select Yes to continue or No to exit. When the command is sent,
the tool will display a message as below: