User Manual

131
[4] End without programming (the old value is retained)
[1] Enter New Value for Adjustment
From the Starting Basic Inspection Quantity menu (Figure 11.13)
use the LEFT/RIGHT scroll button to select [1] and press the OK
button. The screen displays as below. You will need to input a new
value for fuel delivery rate adjustment.
Figure 11.14
The three keys at the bottom of the screen work as below.
[Finish]: After entering a new value, use this key to save the
value to the tool.
[Show]: Press this key to pop up a soft keyboard to facilitate
your input (Figure 11.15).
[Esc]: Press this key to exit.
Figure 11.15
The three keys at the bottom of the screen work as below.