User Manual

132
[Finish]: When you finished the input, select this key to confirm
your input and exit.
[Pre.]: Moves a space to the left.
[Backspace]: Uses this key to erase the previous digit or
character when typing.
NOTE: The data you input must be in the reasonable range. If
the input data is out of range, the tool will display a warning
message “Permissible adjustment range exceeded”.
[2] Reset Adjustment to 0
From the Starting Basic Inspection Quantity menu (Figure 11.13)
use the LEFT/RIGHT scroll button to select [2] and press the OK
button. The tool will automatically reset the value to zero.
[3] Store Data and Exit
When you have finished the fuel delivery rate adjustment, use the
LEFT/RIGHT scroll button to select [3] and press the OK button to
store the new value in the control units; or, select [4] and press the OK
button to retain the old value.
Injection Rate
This function enables you to adjust the injection volume.
1) From the service functions menu (Figure 11.11) use the
UP/DOWN scroll button to select Injection rate and press the
OK button.
2) The tool communicates with the vehicle and reads the fault codes
memory. Follow the on-screen instructions to finish this
procedure.
3) Then the tool will display as below. In this function, you can enter
new value for matching, or reset matching to 100%.