User Manual

134
[Finish]: After entering a new value, use this key to save the
value to the tool.
[Show]: Press this key to pop up a soft keyboard to facilitate
your input (Figure 11.18).
[Esc]: Press this key to exit.
Figure 11.18
The three keys at the bottom of the screen work as below.
[Finish]: When you finished the input, select this key to confirm
your input and exit.
[Pre.]: Moves a space to the left.
[Backspace]: Uses this key to erase the previous digit or
character when typing.
NOTE: The data you input must be in the reasonable range. If the
input data is out of range, the tool will display a warning message
“Permissible adjustment range exceeded”.
[2] Reset Adjustment to 100%
From the Injection rate menu (Figure 11.16) use the LEFT/RIGHT
scroll button to select [2] and press the OK button. The tool will
automatically reset the value to 100%.
[3] Store Data and Exit
When you have finished the injection volume adjustment, use the
LEFT/RIGHT scroll button to select [3] and press the OK button to