User Manual

135
store the new value in the control units; or, select [4] and press the OK
button to retain the old value.
Injector Rate Adjustment
This function enables you to adjust the injector rate for individual
cylinders.
1) From the service functions menu (Figure 11.11) use the
UP/DOWN scroll button to select Injector rate adjustment and
press the OK button.
2) The tool communicates with the vehicle and reads the fault codes
memory. Follow the on-screen instructions to finish this
procedure.
3) Then the tool will display as below. In this function, you can enter
new value for each cylinder.
Figure 11.19
The option keys at the bottom of the screen work as below.
[EDIT 1] Edit Cylinder 1 injector code
[EDIT 2] Edit Cylinder 2 injector code
[EDIT 3] Edit Cylinder 3 injector code
[EDIT 4] Edit Cylinder 4 injector code
[Back] Return to the previous menu
[Restore] Retain the old value