User Manual

136
[1] Enter New Value for Cylinder
From the Injector rate adjustment menu (Figure 11.19) use the
LEFT/RIGHT scroll button to select one option and press the OK
button. The screen displays as below. You will need to input a new
value for Cylinder injector.
Figure 11.20
The three keys at the bottom of the screen work as below.
[Finish]: After entering a new value, use this key to save the
value to the tool.
[Show]: Press this key to pop up a soft keyboard to facilitate your
input (Figure 11.21).
[Esc]: Press this key to exit.
Figure 11.21
The three keys at the bottom of the screen work as below.