User Manual

the vehicle. Contact your local distributor or the

manufacturer’s customer service department for assistance.

7) View a summary of system status (MIL status, DTC counts,

Monitor status) on screen (Figure 5.1). Press OK button for

Diagnostic Menu (Figure 5.3) to come up.

Figure 5.1

 If more than one module is detected, you will be prompted

to select a module before testing.

Figure 5.2

 Use the UP/DOWN scroll button to select a module and

press the OK button.

5.1 Read Codes

 Reading Codes can be done with the key on engine off (KOEO)

or with the key on engine running (KOER).

 Stored Codes are also known as “hard codes”, which are fault