User Manual

31
Figure 5.18
 If you wish to delete the data, select OK and then go to
Playback screen to delete the data.
3) Select Pause to suspend recording. You could resume the
recording process again by selecting Start.
4) You may review the saved data in Playback function.
5) Press ESC button to exit.
5.4 Freeze Frame
Freeze Frame Data allows the technician to view the vehicle’s
operating parameters at the moment a DTC (Diagnostic Trouble Code)
is detected. For example, the parameters may include engine speed
(RPM), engine coolant temperature (ECT), or vehicle speed sensor
(VSS) etc. This information will aid the technician by allowing the
parameters to be duplicated for diagnostic and repair purposes.
1) To view freeze frame data, use the UP/DOWN scroll button to
select Freeze Frame from Diagnostic Menu and press the OK
button (Figure 5.3).
2) Wait a few seconds while the scan tool validates the PID MAP.
3) If retrieved information covers more than one screen, use the
DOWN scroll button, as necessary, until all the data have been
shown up (Figure 5.19).