User Manual

50
Figure 6.8
2) Read carefully the notice on the screen and press the OK button
to continue.
3) Check the battery charge status histogram and press the OK
button to end the service function.
Figure 6.9
The battery charge status histogram will be reset when programming
the DME/DDE or registering a battery replacement.
Register Battery Replacement
This option allows displaying the mileage reading of last battery
replacement, registering the battery replacement after replacing a new
battery and informing the power management system that a new
battery has been fitted to the vehicle.
If the battery change is not registered, the power management system
will not function properly, which may not provide the battery with
Evaluate state of battery charge
Original battery type and battery capacity acc
to vehicle order: 105 Ah AGM
Currently registered battery capacity in the
DME/DDE: 105 Ah AGM
Last battery replacement at km reading: 0
Current odometer reading: 0
[1] Charge status of last 5 days
[2] Charge status histogram
[3] End test module
[3] [2] [1]
Charge status histogram
Charge status histogram
Time with charge status in value
range:
0-20%: 0h
20-40%: 0h
40-60%:0h
60-80%: 247 h
80-100%: 41 h
OK