User Manual

52
Figure 6.12
4) Check the battery capacity and the battery replacement
information on the screen.
Figure 6.13
5) Press the corresponding FUNCTION button [1] to return to the
selection screen or press the corresponding FUNCTION button
[2] to end the service function.
To register the battery replacement:
1) Press the corresponding FUNCTION button [2] to continue.
Display kilometer reading of last
Original battery type and battery
capacity acc to vehicle order: 90 Ah AGM
Last battery replacement: 0 km
Last battery change but one: 0 km
[1] Return to selection
[2] End service function
[2] [1]
Display kilometer reading of last
Notice! If a different battery capacity or
a different battery type was recently
retrofitted, the new battery capacity will
not be indicated properly in the diagnosis
until the terminal has been changed.
Notice! The history of the last battery
change will be deleted while
programming the engine electronics.
OK