User Manual

61
Close-circuit Current Monitoring Evaluation
1) Use the UP/DOWN scroll button to select Close-circuit current
option from the Power supply (Battery) menu and press the OK
button.
Figure 6.34
2) Select Evaluate close-circuit current monitoring option and
press the OK button to display the last 24 close-circuit current
values.
Figure 6.35
3) Use the UP/DOWN scroll button to read the complete
information and press the OK button to end service function.
Power supply (Battery)
1. Battery
2. Close-circuit current
3. Activate rest state
4. Charging battery via diagnostic
socket
5. Auxiliary battery (24V EPS):
Register battery replacement
Close-circuit current
1. Evaluate close-circuit current
monitoring
Close-circuit current
The following results of the last 24 cycles
of the closed-circuit current monitoring
system are stored in the engine control:
Number of measurements at close-circuit
current OK (<80mA): 24
Number of measurements at close-circuit
OK