User Manual

62
Figure 6.36
6.4 Activate Rest State
Power Down Command
This function can be used to place electronic control units in sleep
mode within a short time.
1) Use the UP/DOWN scroll button to select Activate rest state
option from the Power supply (Battery) menu and press the OK
button.
Figure 6.37
2) Select the Power down command option and press the OK
button.
Figure 6.38
3) Use the UP/DOWN scroll button to read the complete
information.
Power supply (Battery)
1. Battery
2. Close-circuit current
3. Activate rest state
4. Charging battery via diagnostic
socket
5. Auxiliary battery (24V EPS):
Register battery replacement
Activate rest state
1. Power down command