User Manual
70
Figure 6.57
8) When the auxiliary battery replacement has been registered
successfully in the EPS, the screen will display as below:
Figure 6.58
9) Press the OK button to end the service function.
NOTE: If the registration is failed, press the OK button and try
again.
Figure 6.59
Register battery replacement
The battery replacement has been
registered successfully in the EPS.
[1]DIAGCODE:
D6121_00000000_03_301
OK
Register battery replacement
Battery replacement could not be
registered in the EPS.
Possible cause(s) of fault.
- Data transfer to the EPS was
interrupted.
OK
Register battery replacement
The battery replacement is entered
into the EPS.
Please wait!