User Manual

86
Figure 8.17
In the Electric parking brake replacement screen, the tool can also
perform three functions, which details could refer to the same
functions described in the Brake cable replacement menu above.
Active Test
During an active test, the tool is used for outputting commands to the
ECU in order to drive the actuators. This test determines the integrity
of the system or parts by monitoring the operation of the actuators or
by reading the EPB ECU data.
To carry out an active test, please follow these steps.
1. Follow the instructions above to display the Diag. menu screen
(Figure 8.3).
2. Select Active Test and a list of possible tests appear. The test
items in the list vary with different vehicles.
Figure 8.18
3. Select a test and the tool will display an information screen as
“The 'apply electric parking brake' operation is used to test
Electric parking brake replacement
1.Put in fitting/removal position
2.Cable tensioning
3.Electric parking brake calibration.
Active
1. Apply electric parking brake
2. Release electric parking brake