User Manual

89
Figure 8.21
2) In the EPB menu, select the desired function and press the OK
button. If the operation is finished successfully, the scan tool will
display a confirmation message. Otherwise, it will display a
message to remind user of a problem. After you exit the
diagnosis program, please repair the problem immediately.
Active Test
1) In the Diagnostic Menu (Figure 8.20), use the UP/DOWN
button to select Active Test to do the actuator test. The scan tool
displays as below.
Figure 8.22
2) In the Active menu, use the UP/DOWN button to select the
desired actuator to begin test. If the selected actuator works
correctly, the tool will display a confirmation message as below
(Figure 8.23). Otherwise, it will display a message to remind
user of a problem. After you exit the diagnosis program, please
repair the problem immediately.
EPB
1. Reactivation of automatic
application
2. Deactivation of automatic
application
Active
1. ABS/ASR recirculation pump
2. Left front intake solenoid valve
3. Right front intake solenoid valve
4. Left rear intake solenoid valve
5. Right rear intake solenoid valve
6. Switching solenoid valve 1
7. Switching solenoid valve 2
Active
Operation completed!
No fault detected!