User Manual

25
Column 2 – displays the scanned systems.
Column 3 – displays the diagnostic indicators describing test results.
These indicators are defined as follows:
 -!-: Indicates that the scanned system may not support the code
reading function, or there is a communication error between the
Display Tablet and the control system.
 -?-: Indicates that the vehicle control system has been detected, but
the Display Tablet cannot accurately locate it.
 Fault(s) | #: Fault(s) indicates there is/are detected fault code(s)
present; “#” indicates the number of the detected faults.
 Pass | No Fault: Indicates the system has passed the scanning
process and no fault has been detected.
Column 4 – to perform further diagnosis or testing on a specific system item,
tap the
○
> button to the right of that item. A Function Menu screen will
display.
Functional Buttons
A brief description of the operations of the Auto Scan’s Functional Buttons’
are displayed in the table below.
Table 4-3 Functional Buttons in Auto Scan
Name
Description
Report
Displays the diagnostic data in the report form.
Quick
Erase
Deletes codes. A warning message screen will display to
inform you of possible data loss when this function is
selected.
OK
Confirms the test result. Continues to the system
diagnosis after the required system is selected by
tapping the item in the Main Section.
Pause
Suspends scanning and it will change to Continue
button after tapped.
ESC
Returns to the previous screen or exits Auto Scan.