User Manual

30
of the screen and the toolbar buttons will display. See Table 4-2
Diagnostics Toolbar Buttons on page 21 for detailed descriptions of the
operations for each button.
2. Main Section
 Name Column – displays the parameter names.
a) Check Box – tap the check box on the left side of the parameter
name to make item selection. Tap the check box again to de-
select the item.
b) Drop-down Button – tap the drop-down button on the right side
of the parameter name to open a sub menu that provides
various choices for data display mode.
 Value Column – displays the values of the parameter items.
 Unit Column – displays the unit for the parameters.
 To change the unit mode, tap the Setting button on the top
toolbar and select a required mode. See Unit on page 82 for
more information.
Display Mode
There are four types of display modes available for data viewing, allowing
you to view various types of parameters in the most suitable way.
Tapping the drop-down button on the right side of the parameter name
to open a sub menu. There are four buttons to configure the data display
mode, and a Help button for access to additional information.
Each parameter item displays the selected mode independently.
1) Analog Gauge Mode – displays the parameters in form of an analog
meter graph.
2) Text Mode – this is the default mode that displays the parameters in
texts and displays in list format.
NOTE
Reading of status parameters, such as a switch reading, which are mostly in
word form, such as ON, OFF, ACTIVE, and ABORT, can only be displayed
in Text Mode. Whereas reading of value parameters, such as a sensor
reading, can be displayed in text mode and other graph modes.
3) Waveform Graph Mode – displays the parameters in waveform
graphs.