User Manual

31
When this mode is applied, three control buttons will display on the right
side of the parameter item, allowing you to manipulate the display status.
 Text Button – resumes Text Display Mode.
 Scale Button – changes the scale values, which are displayed below
the waveform graph. There are four scales available: x1, x2, x4 and
x8.
 Zoom-in Button – tap once to display the selected data graph in full
screen.
 Edit Button – tap this button to open an edit window, on which
you can set the waveform color and the line thickness displayed
for the selected parameter item.
 Scale Button - changes the scale values, which are displayed
below the waveform graph. There are four scales available: x1,
x2, x4 and x8.
 Zoom-out Button – exits full screen display.
4) Digital Gauge Mode – displays the parameters in form of a digital
gauge graph.
Full Screen Display – this option is only available in the waveform graph
mode, and mostly used in Graph Merge status for data comparison.
There are three control buttons available on the top right side of the
screen under this mode.
 To edit the waveform color and line thickness in a data graph
1. Select 1 to 3 parameter items to display in Waveform Graph
mode.
2. Tap the Zoom-in Button on the right to display the data graph
in full screen.
3. Select a parameter item on the left column.
4. Select a desired sample color from the middle column.
5. Select a desired sample line thickness from the right column.
6. Repeat steps 3-5 to edit the waveform for each parameter item.
7. Tap Done to save the setting and exit, or tap Cancel to exit
without saving.