User Manual

33
There are four navigation buttons on top of the Setting mode screen.
 Selected Button – displays the configuration screen on which you can
set the threshold values, an upper limit and a lower limit, for triggering
the buzzer alarm. This function only applies to the Waveform Graph
display mode.
a) MIN – tap to open a virtual keyboard, allowing you to enter the
required lower limit value.
b) MAX – tap to open a virtual keyboard, allowing you to enter the
required upper limit value.
c) Buzzer Alarm – switches the alarm on and off. The alarm function
beeps as a reminder whenever the data reading reaches the pre-set
minimum or maximum point.
 To set threshold limits for the parameter values
1. Tap the Setting functional button at the bottom of the Live Data
screen.
2. Tap the Selected navigation button.
3. Select a parameter item on the left column, or enter the item name
in the Search bar.
4. Tap on the right side of the MIN button, and enter the required
minimum value.
5. Tap on the right side of the MAX button, and enter the required
Figure 4-13 Sample Setting Mode in Live Data