User Manual

82
Settings
Selecting Settings application opens a setup screen to adjust the default
setting and view information about the MaxiCOM system. There are eight
system settings:
 Unit
 Language
 Printing Setting
 Notification Center
 Auto Update
 About
 System Settings
 Firmware
This section describes the operation procedures for the settings.
Unit
This option allows you to change the measurement unit for the diagnostic
system.
 To adjust the unit setting
1. Tap the Settings application on the MaxiCOM Job Menu.
2. Tap the Unit option on the left column.
3. Select the required measurement unit, Metric or English. A check
mark will display on the right of the selected unit.
4. Tap the Home button on the top left corner to return to the MaxiCOM
Job Menu or select another setting.