User Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- For Services and Support
- Safety Information
- Safety Messages
- Safety Instructions
- 1 Using this Manual
- 2 General Introduction
- 3 Getting Started
- 4 Diagnostics
- 5 Service Operations
- 6 Shop Manager
- 7 Data Manager
- 8 Settings
- 9 Update
- 10 Support
- 11 Academy
- 12 Remote Desk
- 13 MaxiFix
- 14 Quick Link
- 15 Function Viewer
- 16 Maintenance and Service
- 17 Compliance Information
- 18 Warranty
84
Printing Setting
This option allows you to print via Wi-Fi connection.
To setup the printer connection
1. Tap the Settings application on the MaxiCOM Job Menu.
2. Tap the Printing Setting option on the left column.
3. Tap the Print via Network item to activate the printing function that
enables the device to send files to the printer through the PC via Wi-
Fi connection.
4. Tap the Home button on the top left corner to return to the MaxiCOM
Job Menu or select another setting.
NOTE
The MaxiSys Printer runs automatically after the installation. The computer,
printer and the tablet must be connected to the same network.
To perform printing via PC
1. Run the MaxiSys Printer on the computer.
2. Click Test Print to make sure the printer is working successfully.
3. Tap the Print button on the toolbar of the Display Tablet. A test
document will be sent to the computer for printing.
If the Auto Print option in the MaxiSys Printer is selected, the
MaxiSys Printer will print the received document automatically.
Figure 8-3 Sample Printing Setting Screen