User Manual V2.0

Diagnostics Operations
21
Select Automatic selection and the system will proceed to acquire VIN
information automatically or allow users to input the VIN manually.
4.3.2 Manual VIN Input
For some vehicles that do not support the Auto VIN Scan function, the
MaxiSys MS906 diagnostic system allows you to enter the vehicle VIN
manually.
 To perform Manual VIN Input
1. Tap the Diagnostics application button from the MaxiSys Job
Menu. The Vehicle Menu displays. (Figure 4- 1)
2. Tap the VIN Scan button on the top toolbar.
3. Select Manual input.
4. Tap the input box and enter the correct VIN.
Figure 4- 4 Manual VIN Input
5. Tap Done. The vehicle will be identified in a few seconds, and once
the matching is successful, the system will guide you to the Vehicle
Diagnostics screen directly. (Figure 4- 2)
6. Tap Cancel to exit Manual Input.
4.3.3 Manual Vehicle Selection
When the vehicle’s VIN is not automatically retrievable through the vehicle's
ECU, or the specific VIN is unknown, you can choose to select the vehicle
manually.
Step-by-step Vehicle Selection
This mode of vehicle selection is menu driven; you can simply follow the
on-screen prompts and make a series of choices. Each selection you make